If you choose to mount your QuickTalker Freestyle Pro, and you have a Kickstand/ Handstrap, you will need to remove and exchange the circular acrylic plate. This allows better fitment of the QuickTalker Freestyle Pro in the tablet holder provided with our Latitude for QuickTalker Freestyle Mounting Arm.
Here are the instructions to perform this process;
- Contact our ableCARE product success team and request a circular acrylic plate. Our team will provide one to you free of charge.
- Remove the silicon layer of the protective case from your QuickTalker Freestyle
- Detach the 9 silicone attachment points from the circular acrylic plate. The best way to do this is to push down on the center of each of these spots with your fingernail, while using your other hand to push the silicone away from the acrylic
- Remove the circular acrylic plate with the Kickstand/ Handstrap
- Attach the new acrylic plate. The best way to do this is to position the holes of the circular acrylic plate over the silicone inserts. Then push the silicone into place from the back of the case until the silicone inserts are fully locked into the circular acrylic sheet
- Reattach the protective silicone layer to the hard plastic layer of the case
If you have any additional questions, please contact ableCARE Product Success Team for further assistance.